CBD Solution Board
Button-Controlled Output with Adjustable Voltage E-Cig Solution Board
Model: RMY001
Size: 41.1×14.0mm
Low Power: Quiescent Current <15μA
Adjustable Voltage Output
Short Circuit Protection, 10s Over-Inhalation, Over Temperature Protection, Low Voltage Protection
Anti-Interference
Product overview
This is an electronic cigarette circuit board that uses buttons to adjust the output voltage and has a digital display. It mainly consists of the following circuit modules: MCU control module, power output module, digital display and LED light display, charging management module, and lithium battery control module. The button module can recognize the user's operation of smoking by pressing the button and display it through the digital display, so that the user can understand the device status when smoking.
Functional Highlights
- Signal processing: The airflow changes captured by the sensor will be converted into capacitance change signals, which will be processed by the ASIC chip and transmitted to the MCU control module for output control.
- Protection function: This PCBA solution board has multiple protection functions to ensure user safety during use, including lithium battery protection function, smoking timeout protection, over temperature protection, short circuit protection, and low battery protection.
- Module form: SMT packaging is used to form a module form, which allows it to be directly soldered onto the circuit, making it very suitable for PCBA integration, thereby reducing assembly costs and improving production efficiency.
Absolute Maximum Ratings | Parameter | Symbol | Value | Unit |
Supply Voltage (VDD) | VDD | -0.3~5.0 | V | |
Charging Voltage (VCC) | VCC | -0.3~6.5 | V | |
AT Output Current | IAT | 5~25 | A | |
Output Load | Rload | 0.1~3.5 | Ω |
Performance Parameters | Symbol | Parameter | Conditions | Min | Typ | Max | Unit |
P | Operating Air Pressure | Pa | |||||
VDD | working voltage | 3 | 4.25 | V | |||
Vuvlo | Low voltage detection threshold | VDD from high to low | 2.9 | 3.1 | 3.25 | V | |
Iq | static current | Power saving mode | – | 5 | 8 | uA | |
Rdson | Switching tube conduction impedance | IAT=1A | – | 35 | 60 | mΩ | |
Iled | LED output current | – | 5 | – | mA | ||
RS | Short circuit protection threshold | – | 0.6 | – | Ω | ||
VAT | Constant average voltage output | VDD=4.2V, Output empty load | – | 3.6 | – | V | |
Rload | Output load | 0.8 | – | 3 | Ω | ||
Dmin | Minimum conduction duty cycle | VDD=4.2V | – | 90 | – | % | |
TSMOKE | Smoking timeout | – | 10 | – | S | ||
VCC | Charging input voltage | 4.5 | – | 6.5 | V | ||
VFLOAD | Floating charging threshold voltage | 4.15 | 4.2 | 4.25 | V | ||
VTRKL | Drip flow, constant flow | VDD from low to high | 2.95 | 3 | 3.05 | V | |
ICH | Charging current | VCC=5V | – | 280 | – | mA | |
ITRIKL | trickle charge current | VCC=5V | – | 50 | – | mA | |
TSD | Overheating protection threshold | – | 90 | – | ℃ |
LED/Display Status | working condition | Digital tube display |
Battery power on self-test | The ticker flashes three times | |
Normal triggering of cigarette lighting | The battery indicator and gear indicator are always on | |
Smoking normally | The battery indicator and gear indicator are always on | |
Normal end of cigarette lighting | The battery light and gear light are off | |
Smoking timeout | The battery indicator flashes 3 times | |
Overcurrent or short circuit protection | The number display "0" stays on for 2 seconds | |
Battery undervoltage before smoking | The battery indicator light and L remain on for 2 seconds at the same time | |
Battery undervoltage after cigarette lighting | The battery indicator light and L remain on for 2 seconds at the same time | |
Normal charging | Dynamic display effect of digital tube after flashing the ticker twice | |
Battery fully charged | The marquee lights are all on | |
Release charging (charger removed) |
Product Features | Use buttons to adjust output, power adjustable |
The circuit has three working modes: charging mode, normal working mode, and power-saving mode; | |
In power-saving mode: static current<10 μ A; | |
Working voltage: 2.1V~5.0V; | |
Supports wide voltage charging (4.5~6.5V); Equipped with OVP overvoltage protection | |
Contains protection functions such as overheating (OTP), undervoltage (UVLO), short circuit (SCP), etc; | |
Multiple digital display functions; |
Electronic atomizer PCBA solution
PCBA Products
Shenzhen RIMYI Technology Co., LTD
Define high-end electronic cigarette
PCBA technology benchmark
Anti oil touch technology, response<50ms
Bluetooth seamless connection, OTA remote upgrade
Software level taste algorithm, temperature control accuracy of ± 1 ℃
Industry leading heat dissipation design, stable output of 200W
Bluetooth seamless connection, OTA remote upgrade
Software level taste algorithm, temperature control accuracy of ± 1 ℃
Industry leading heat dissipation design, stable output of 200W
Shenzhen RIMYI Technology Co., LTD
Define high-end electronic cigarette
PCBA technology benchmark
Anti oil touch technology, response<50ms
Bluetooth seamless connection, OTA remote upgrade
Software level taste algorithm, temperature control accuracy of ± 1 ℃
Industry leading heat dissipation design, stable output of 200W
Bluetooth seamless connection, OTA remote upgrade
Software level taste algorithm, temperature control accuracy of ± 1 ℃
Industry leading heat dissipation design, stable output of 200W