Hookah Solution Board Customized for E-Cigarette PCBA

Shisha -Lösungsbrett

Button-Controlled Output with Preheating E-Cig Solution Board

Modell: RMY005

Größe: 123.00(± 0,2)× 67,00(± 0,1)mm

Niedrige Leistung: Ruhender Strom <35μA

Einstellbare Temperaturregelung

Kurzschlussschutz, Über Temperaturschutz, Niedriger Spannungsschutz

Produktübersicht

This is an electronic cigarette circuit board that uses button knobs to adjust the output voltage and has LED light display and voice broadcast. It mainly consists of the following circuit modules: MCU control module, Ausgangsmodul, digital tube display and LED light display, charging management module, and lithium battery control module. The button adjustment module can recognize the user's button operation to smoke through LED and voice broadcast, so that the user can understand the device status when smoking.

Funktionale Highlights

Signal processing: Identify user smoking by detecting button signals, and the MCU controls the output module to output heating after receiving the button signals.
User operation judgment: Identify user smoking by detecting key signals, and the MCU controls the output module to output heating after receiving the key signals.
Protection function: This PCBA solution board has multiple protection functions to ensure user safety during use, including lithium battery protection function, smoking timeout protection, over temperature protection, short circuit protection, and low battery protection.
Module form: SMT packaging is used to form a module form, which allows it to be directly soldered onto the circuit, making it very suitable for PCBA integration, thereby reducing assembly costs and improving production efficiency.

Absolute maximale Bewertungen	Parameter	Symbol	Wert	Einheit
	Versorgungsspannung (VDD)	VDD	-0.3~13	V
	Ladespannung (VCC)	VCC	-0.3~ 6,5	V
	Bei Ausgangsstrom	Iat	15	A
	Ausgangslast	Radung	0.4	Oh

Leistungsparameter	Symbol	Parameter	Bedingungen	Min	Typ	Max	Einheit
	P	Betriebsluftdruck		- -	- -	- -	Pa
	VDD	Arbeitsspannung		9.0V		12.75	V
	Vuvlo	Schwelle mit niedriger Spannungserkennung	VDD von hoch nach niedrig	8.8V	9	9.1	V
	IQ	statischer Strom	Stromsparmodus	- -	30	35	uA
	Rdson	Impedanz von Schaltrohrleitungsimpedanz	Hier = 1a	- -	- -	- -	mΩ
	Iled	LED -Ausgangsstrom		- -	- -	- -	mA
	Rs	Kurzschlussschutzschwelle		- -	0.3	- -	Oh
	Mehrwertsteuer	Konstante Durchschnittsspannungsausgang	Vdd = 4,2 V, Leere Last ausgeben	- -	- -	- -	V
	Radung	Ausgangslast		0.3	- -	- -	Oh
	Dmin	Mindestleitungszyklus	Vdd = 4,2 V	- -	- -	- -	%
	Tsmoke	Rauchzeitüberschreitung		- -	10	- -	S
	VCC	Ladeeingangsspannung			5	6.5	V
	VFLOAD	Schwimmende Ladeschwellenspannung		12.5V	12.6	12.7	V
	Vtrkl	Tropfenfluss, konstanter Fluss	VDD von niedrig bis hoch	8.75	9	9.15	V
	ICH	Aufladungsstrom	VCC = 5V	- -	3000	- -	mA
	Itrikl	Trickle Ladungsstrom	VCC = 5V	- -	300	- -	mA
	TSD	Überhitzungsschutzschwelle		- -	90	- -	℃

LED/Anzeigestatus	Arbeitszustand	Voice+LED display
	Post	The LED light strip lights up in the order of red, green, and blue
	Pre-heating	Start up and enter preheating mode. Preheat according to the gear temperature for 5 Minuten. During the preheating period, the LED strip indicator lights up at a rate of 7 scrolling lights per minute, and all lights up. The preheating end will be announced with a voice prompt. During the preheating process, the temperature can be adjusted at any time. After the preheating is completed, the light strip should follow a breathing cycle of 5.5 Sekunden.
	Turn on/off	1. Power on: Press and hold the knob for 2 seconds to turn on the device, and the startup voice will be broadcasted. The indicator light on the strip will light up one by one from low to the current battery level.
	Gear temperature control function	2. Shutdown: Turn off the Changan knob for 2 Sekunden, and the indicator light on the LED strip will turn off the battery's current level position one by one, and the shutdown voice will be broadcasted. "
	Standby function	1. Use the knob to adjust the temperature range between 180-330 ℃.
	Überstrom- oder Kurzschlussschutz	2. Rotate clockwise to increase temperature. The light strip lights up from both sides towards the middle to the set gear, and the color of the light strip is yellow.
	Unterspannung der Batterie vor dem Rauchen	3. Rotate counterclockwise to reduce temperature. The light strip turns off from the middle to both sides at the set gear, and the color of the light strip is yellow. "
	Batterieunterspannung nach Zigarettenbeleuchtung	When not in use, the temperature drops by 5 degrees Celsius every 5 Sekunden, with a maximum decrease of 20% of the set temperature and maintained.
	Normales Laden	Re suction the temperature and increase the full power to the set temperature. "
	Batterie voll aufgeladen	- -
	Ladung veröffentlichen (Ladegerät entfernt)	- -

Produktmerkmale	It has a preheating function, which can preheat for a long time and has adjustable temperature control.
	Im Leistungssparmodus: statischer Strom<35 μ A;
	Arbeitsspannung: 8.5V~12.8V;
	Unterstützt breite Spannungsladung (4.5~ 6,5 V);
	Enthält Schutzfunktionen wie Überhitzung (OTP), Unterspannung (Uvlo), Kurzschluss (Scp), usw;
	Equipped with LED light display function and voice broadcast function