Pod Solution Board

3-Wire MEMS Mic, Load 0.5~3.0Ω, Negative Pressure -150±50Pa E-Cig Circuit Board

Modell: RMY003

Größe: 40.2× 30,9 mm

Niedrige Leistung: Ruhender Strom <20μA

Einstellbare Leistung

Short Circuit Protection, 10s Über-Inhalation, Over Temperature Protection, Niedriger Spannungsschutz

Digitalrohranzeige

Product overview

This is an electronic cigarette circuit board triggered by an airflow sensor for smoking and with adjustable power. It has dual outputs and is mainly composed of the following circuit modules: MCU control module, dual power output module, OLED display screen, colorful light module, charging management module, and lithium battery control module. It can detect smoking actions and control the output through MCU, and display the output wattage and output status through a digital tube.

Functional Highlights

  • MEMS airflow sensor: The microphone airflow sensor detects changes in air pressure and identifies user smoking behavior.
  • Signal processing: The airflow changes captured by the sensor will be converted into capacitance change signals, which will be processed by the ASIC chip and transmitted to the MCU control module for output control.
  • Protection function: This PCBA solution board has multiple protection functions to ensure user safety during use, including lithium battery protection, smoking timeout protection, over temperature protection, short circuit protection, and low battery protection
  • Module form: SMT packaging is used to form a module form, which allows it to be directly soldered onto the circuit, making it very suitable for PCBA integration, thereby reducing assembly costs and improving production efficiency.
Absolute Maximum Ratings Parameter Symbol Value Unit
Supply Voltage (VDD) VDD -0.3~5.0 V
Ladespannung (VCC) VCC -0.3~6.5 V
AT Output Current IAT 8 A
Output Load Rload 0.5 Ω
Performance Parameters Symbol Parameter Bedingungen Min Typ Max Unit
P Operating Air Pressure -150 -200 -250 Pa
VDD working voltage 3.2 4.2 V
Vuvlo Low voltage detection threshold VDD from high to low 2.95 3 3.05 V
Iq static current Power saving mode 15 20 uA
Rdson Switching tube conduction impedance IAT=1A 18 20
Iled LED output current mA
RS Short circuit protection threshold 0.3 Ω
VAT Constant average voltage output VDD=4.2V, Output empty load V
Rload Output load 0.5 3 Ω
Dmin Minimum conduction duty cycle VDD=4.2V 95 %
TSMOKE Smoking timeout 10 S
VCC Charging input voltage 4.5 5 6.5 V
VFLOAD Floating charging threshold voltage 4.15 4.2 4.25 V
VTRKL Drip flow, constant flow VDD from low to high 2.95 3 3.05 V
ICH Charging current VCC=5V 800 mA
ITRIKL trickle charge current VCC=5V 70 mA
TSD Overheating protection threshold 85
LED/Display Status working condition Digital tube&LED
Battery power on self-test The digital tube light is fully on for 1 second, while the blue light flashes once
Normal triggering of cigarette lighting The blue indicator light gradually turns on
Smoking normally The blue indicator light is constantly on
Normal end of cigarette lighting The blue indicator light gradually goes out
Smoking timeout The power symbol of the digital tube flashes twice
Overcurrent or short circuit protection The power symbol of the digital tube flashes three times
Battery undervoltage before smoking The power symbol of the digital tube flashes 10 mal
Battery undervoltage after cigarette lighting The power symbol of the digital tube flashes 10 mal
Normal charging Digital tube battery icon scrolling
Battery fully charged After fully charged, the battery icon stops flashing
Release charging (charger removed) Turn off the screen and enter low power consumption mode
Product Features Using MEMS airflow sensors to trigger output;
Can output different power according to different modes
In power-saving mode: static current<15 μ A;
Working voltage: 2.1V~5.0V;
Supports wide voltage charging (4.5~6.0V);
Contains protection functions such as overheating (OTP), undervoltage (UVLO), short circuit (Scp), usw;
Equipped with digital display function,

Electronic atomizer PCBA solution

R801AN14-LXX-OP-150 (± 50) Pa, weißer Ölfilm
R801AN14-LXX-OP-150 (± 50) Pa, weißer Ölfilm
R801AN14-P16-OP-150 (± 50) Pa, weißer Ölfilm
R801AN14-P16-OP-150 (± 50) Pa, weißer Ölfilm
R982HN12-LXX-OP-150 (± 50) Pa, weißer Ölfilm
R982HN12-LXX-OP-150 (± 50) Pa, weißer Ölfilm
R982HN12-P16-gegen-150 (± 50) Pa, weißer Ölfilm
R982HN12-P16-gegen-150 (± 50) Pa, weißer Ölfilm
0.42-Zoll oled
0.42-Zoll oled
0.42-Zoll tft
0.42-Zoll tft
0.49-Zoll oled
0.49-Zoll oled
0.69-Zoll oled
0.69-Zoll oled
4-layer PCB
4-layer PCB
6-layer PCB
6-layer PCB
8-layer PCB
8-layer PCB
Double sided PCB
Double sided PCB
CBD-E-Zigaretten
CBD-E-Zigaretten
Einweg-E-Zigaretten
Einweg-E-Zigaretten
Hochleistungs-E-Zigaretten
Hochleistungs-E-Zigaretten
Shisha -Lösungsbrett
Shisha -Lösungsbrett
Shenzhen Rimyi Technology Co., LTD

Define high-end electronic cigarette
PCBA technology benchmark

Anti oil touch technology, response<50MS
Bluetooth seamless connection, OTA remote upgrade
Software level taste algorithm, temperature control accuracy of ± 1 ℃
Industry leading heat dissipation design, stable output of 200W
Shenzhen Rimyi Technology Co., LTD

Define high-end electronic cigarette
PCBA technology benchmark

Anti oil touch technology, response<50MS
Bluetooth seamless connection, OTA remote upgrade
Software level taste algorithm, temperature control accuracy of ± 1 ℃
Industry leading heat dissipation design, stable output of 200W