E-Zigaretten-Pod-System PCBA-Board

3-Wire MEMS Mic, Load 0.5~3.0Ω, Negative Pressure -150±50Pa E-Cig Circuit Board

Modell: RMY003
Größe: 40.2× 30,9 mm
Niedrige Leistung: Ruhender Strom <20μA
Einstellbare Leistung
Short Circuit Protection, 10s Über-Inhalation, Over Temperature Protection, Niedriger Spannungsschutz
Digitalrohranzeige

Aktie:

Smart Pod System PCBA Board for Enhanced Vaping Control

This advanced pod system PCBA board powers modern e-cigarette devices. It features button-operated voltage adjustment and a clear digital display. The MCU control module ensures precise command execution. Its power output module delivers stable performance. Users can track device status instantly through digital and LED indicators. A reliable charging management module supports safe, fast recharging. The integrated lithium battery control enhances safety and efficiency. Every puff is detected via the button module and displayed in real time. Built for smooth function and intuitive use, this board upgrades the vaping experience with smart control and seamless performance.

Functional Highlights

Signal Processing: The MCU detects button signals to recognize smoking actions. Then, it instantly controls the output module for heating.
User Operation Detection: The MCU identifies smoking by analyzing key signals. After detection, it quickly triggers the heating process.
Safety Protection Functions: This pod system PCBA includes multiple safety protections. It offers a lithium battery, timeout, and over-temperature protection. It also prevents short circuits and protects during a low battery.
Module Structure: It uses SMT packaging for module formation. This allows direct circuit soldering without additional steps. As a result, it cuts assembly costs and boosts production efficiency.

Absolute Maximum Ratings	Parameter	Symbol	Value	Unit
	Supply Voltage (VDD)	VDD	-0.3~5.0	V
	Ladespannung (VCC)	VCC	-0.3~6.5	V
	AT Output Current	IAT	8	A
	Output Load	Rload	0.5	Ω

Performance Parameters	Symbol	Parameter	Bedingungen	Min	Typ	Max	Unit
	P	Operating Air Pressure		-150	-200	-250	Pa
	VDD	working voltage		3.2		4.2	V
	Vuvlo	Low voltage detection threshold	VDD from high to low	2.95	3	3.05	V
	Iq	static current	Power saving mode	–	15	20	uA
	Rdson	Switching tube conduction impedance	IAT=1A	–	18	20	mΩ
	Iled	LED output current		–	–	–	mA
	RS	Short circuit protection threshold		–	0.3	–	Ω
	VAT	Constant average voltage output	VDD=4.2V, Output empty load	–	–	–	V
	Rload	Output load		–	0.5	3	Ω
	Dmin	Minimum conduction duty cycle	VDD=4.2V	–	95	–	%
	TSMOKE	Smoking timeout		–	10	–	S
	VCC	Charging input voltage		4.5	5	6.5	V
	VFLOAD	Floating charging threshold voltage		4.15	4.2	4.25	V
	VTRKL	Drip flow, constant flow	VDD from low to high	2.95	3	3.05	V
	ICH	Charging current	VCC=5V	–	800	–	mA
	ITRIKL	trickle charge current	VCC=5V	–	70	–	mA
	TSD	Overheating protection threshold		–	85	–	℃

LED/Display Status	working condition	Digital tube&LED
	Battery power on self-test	The digital tube light is fully on for 1 second, while the blue light flashes once
	Normal triggering of cigarette lighting	The blue indicator light gradually turns on
	Smoking normally	The blue indicator light is constantly on
	Normal end of cigarette lighting	The blue indicator light gradually goes out
	Smoking timeout	The power symbol of the digital tube flashes twice
	Overcurrent or short circuit protection	The power symbol of the digital tube flashes three times
	Battery undervoltage before smoking	The power symbol of the digital tube flashes 10 mal
	Battery undervoltage after cigarette lighting	The power symbol of the digital tube flashes 10 mal
	Normal charging	Digital tube battery icon scrolling
	Battery fully charged	After being fully charged, the battery icon stops flashing
	Release charging (charger removed)	Turn off the screen and enter low power consumption mode

Product Features	Using MEMS airflow sensors to trigger output.
	Can output different power according to different modes
	In power-saving mode: static current<15 μA;
	Working voltage: 2.1V~5.0V;
	Supports wide voltage charging (4.5~6.0V);
	Contains protection functions such as overheating (OTP), undervoltage (UVLO), short circuit (Scp), usw.
	Equipped with a digital display function,