Cigarettes électroniques du système de pod
3-Wire MEMS Mic, Load 0.5~3.0Ω, Negative Pressure -150±50Pa E-Cig Circuit Board
- Modèle: RMY003
- Taille: 40.2× 30,9 mm
- Faible puissance: Courant de repos <20μA
- Sortie de sortie réglable
- Short Circuit Protection, 10s sur-inhalation, Over Temperature Protection, Protection basse tension
- Affichage de tube numérique
- Product overview
This is an electronic cigarette circuit board triggered by an airflow sensor for smoking and with adjustable power. It has dual outputs and is mainly composed of the following circuit modules: MCU control module, dual power output module, OLED display screen, colorful light module, charging management module, and lithium battery control module. It can detect smoking actions and control the output through MCU, and display the output wattage and output status through a digital tube.
Functional Highlights
- Signal processing: Identify user smoking by detecting button signals, and the MCU controls the output module to output heating after receiving the button signals.
- User operation judgment: Identify user smoking by detecting key signals, and the MCU controls the output module to output heating after receiving the key signals.
- Protection function: This PCBA solution board has multiple protection functions to ensure user safety during use, including lithium battery protection function, smoking timeout protection, over temperature protection, short circuit protection, and low battery protection.
- Module form: SMT packaging is used to form a module form, which allows it to be directly soldered onto the circuit, making it very suitable for PCBA integration, thereby reducing assembly costs and improving production efficiency.
| Absolute Maximum Ratings | Parameter | Symbol | Value | Unit |
| Supply Voltage (VDD) | VDD | -0.3~5.0 | V | |
| Tension de charge (VCC) | VCC | -0.3~6.5 | V | |
| AT Output Current | IAT | 8 | UN | |
| Output Load | Rload | 0.5 | Ω |
| Performance Parameters | Symbol | Parameter | Conditions | Min. | Typ | Max. | Unit |
| P | Operating Air Pressure | -150 | -200 | -250 | Pa | ||
| VDD | working voltage | 3.2 | 4.2 | V | |||
| Vuvlo | Low voltage detection threshold | VDD from high to low | 2.95 | 3 | 3.05 | V | |
| Iq | static current | Power saving mode | – | 15 | 20 | uA | |
| Rdson | Switching tube conduction impedance | IAT=1A | – | 18 | 20 | mΩ | |
| Iled | LED output current | – | – | – | mA | ||
| RS | Short circuit protection threshold | – | 0.3 | – | Ω | ||
| VAT | Constant average voltage output | VDD=4.2V, Output empty load | – | – | – | V | |
| Rload | Output load | – | 0.5 | 3 | Ω | ||
| Dmin | Minimum conduction duty cycle | VDD=4.2V | – | 95 | – | % | |
| TSMOKE | Smoking timeout | – | 10 | – | S | ||
| VCC | Charging input voltage | 4.5 | 5 | 6.5 | V | ||
| VFLOAD | Floating charging threshold voltage | 4.15 | 4.2 | 4.25 | V | ||
| VTRKL | Drip flow, constant flow | VDD from low to high | 2.95 | 3 | 3.05 | V | |
| ICH | Charging current | VCC=5V | – | 800 | – | mA | |
| ITRIKL | trickle charge current | VCC=5V | – | 70 | – | mA | |
| TSD | Overheating protection threshold | – | 85 | – | ℃ |
| LED/Display Status | working condition | Digital tube&LED |
| Battery power on self-test | The digital tube light is fully on for 1 second, while the blue light flashes once | |
| Normal triggering of cigarette lighting | The blue indicator light gradually turns on | |
| Smoking normally | The blue indicator light is constantly on | |
| Normal end of cigarette lighting | The blue indicator light gradually goes out | |
| Smoking timeout | The power symbol of the digital tube flashes twice | |
| Overcurrent or short circuit protection | The power symbol of the digital tube flashes three times | |
| Battery undervoltage before smoking | The power symbol of the digital tube flashes 10 fois | |
| Battery undervoltage after cigarette lighting | The power symbol of the digital tube flashes 10 fois | |
| Normal charging | Digital tube battery icon scrolling | |
| Battery fully charged | After fully charged, the battery icon stops flashing | |
| Release charging (charger removed) | Turn off the screen and enter low power consumption mode |
| Product Features | Using MEMS airflow sensors to trigger output; |
| Can output different power according to different modes | |
| In power-saving mode: static current<15 μ A; | |
| Working voltage: 2.1V~5.0V; | |
| Supports wide voltage charging (4.5~6.0V); | |
| Contains protection functions such as overheating (OTP), undervoltage (UVLO), court-circuit (SCP), etc.; | |
| Equipped with digital display function, |
Leaving a Message
Remplissez le formulaire, Spécifiez vos exigences et votre quantité (PCB / PCBA), et télécharger tous les documents pertinents. Nous vous fournirons immédiatement un citation gratuite!
Pour tous les produits achetés auprès de nous, Si vous rencontrez des problèmes de qualité: Nous fournissons "24 * 7 Support après-vente"
Avant de nous envoyer des fichiers, tu peux choisir de Signez un accord de confidentialité avec nous Pour vous assurer que vous pouvez nous choisir en toute confiance.
- Directeur des ventes：Rmy-silvia
- Tél ：+86 18126317732
- E-mail：Sales009@rmychip.com
- Whatsapp ：+86 18126317732
- Adresse de l'entreprise: 8e plancher,Bâtiment B,Fenghuangzhigu,Street Xixiang,Bao'an District,Shenzhen,Chine
- Adresse d'usine: 4TH-6e étages,Bâtiment industriel du farité,N ° 52 Tiezai Road,Street Xixiang, Bao'an District,Shenzhen,Chine
