- 產品概述
Reliable Core for Smart Hookah Devices
Our hookah device PCBA module delivers powerful performance in a compact form. Designed for modern electronic hookah products, it integrates essential control, protection, and user interface functions in one board.
Precise MCU-Controlled System
The module features an advanced MCU that manages power output, airflow signals, and user interaction. It interprets button operations and airflow triggers, offering accurate control with real-time display feedback.
User-Friendly Digital Display
A built-in digital screen shows voltage levels and device status. Users can adjust the output with tactile buttons and monitor changes instantly during operation.
Robust Safety Protection Built-In
Safety is built into the core. The module includes:
- Lithium battery protection
- Overheat protection
- Smoking timeout control
- Short circuit prevention
- Low battery alerts
These protections ensure a stable and secure vaping experience every time.
Efficient Signal Processing
Sensors detect airflow changes and convert them into capacitance signals. The ASIC chip processes these and relays them to the MCU for action. This ensures a fast and accurate response to every inhale.
Compact SMT Packaging for Easy Integration
The module uses SMT packaging, ideal for PCBA integration. Manufacturers can solder it directly onto their circuit boards, cutting down assembly time and cost.
Customizable and Scalable for OEM Projects
We support bulk orders and custom configurations. Whether you’re launching a new hookah device or upgrading existing systems, our PCBA module gives your product a high-tech edge.
| 絕對最大評分 | 範圍 | 象徵 | 價值 | 單元 |
| 電源電壓 (VDD) | VDD | -0.3〜13 | v | |
| 充電電壓 (VCC) | VCC | -0.3〜6.5 | v | |
| 在輸出電流 | IAT | 15 | 一個 | |
| 輸出負載 | rload | 0.4 | 哦 |
| 性能參數 | 象徵 | 範圍 | 狀況 | 最小 | typ | 最大限度 | 單元 |
| p | 操作氣壓 | - | - | - | PA | ||
| VDD | 工作電壓 | 9.0v | 12.75 | v | |||
| Vuvlo | 低壓檢測閾值 | VDD從高到低 | 8.8v | 9 | 9.1 | v | |
| 智商 | 靜電電流 | 節能模式 | - | 30 | 35 | 做 | |
| RDSON | 切換管傳導阻抗 | 這裡= 1A | - | - | - | MΩ | |
| 愛 | LED輸出電流 | - | - | - | 馬 | ||
| 盧比 | 短路保護閾值 | - | 0.3 | - | 哦 | ||
| 增值稅 | 恆定平均電壓輸出 | VDD = 4.2V, 輸出空負載 | - | - | - | v | |
| rload | 輸出負載 | 0.3 | - | - | 哦 | ||
| Dmin | 最小傳導佔空比 | VDD = 4.2V | - | - | - | % | |
| tsmoke | 吸煙超時 | - | 10 | - | s | ||
| VCC | 充電輸入電壓 | 5 | 6.5 | v | |||
| VFLOAD | 浮動充電閾值電壓 | 12.5v | 12.6 | 12.7 | v | ||
| vtrkl | 滴水流, 恆定流動 | VDD從低到高 | 8.75 | 9 | 9.15 | v | |
| 我 | 充電電流 | VCC = 5V | - | 3000 | - | 馬 | |
| itrikl | trick流電流 | VCC = 5V | - | 300 | - | 馬 | |
| TSD | 過熱保護閾值 | - | 90 | - | ℃ |
| LED/顯示狀態 | 工作條件 | 語音+LED顯示 |
| 郵政 | LED燈條以紅色的順序亮起, 綠色的, 和藍色 | |
| 預熱 | First, power on to enter preheating mode. Then, preheat based on gear temperature for 5 分鐘. During this time, adjust the temperature anytime. Meanwhile, the LED strip lights start scrolling. They display 7 每分鐘滾動燈. At the same time, all indicator lights remain on. Next, a voice prompt announces preheating completion. Afterward, the light strip switches to breathing mode. Finally, it follows a 5.5-second breathing cycle. | |
| 打開/關閉 | 1. 電源打開: 按住旋鈕 2 幾秒鐘打開設備, 並且啟動聲音將被播放. 條帶上的指示燈將從低到當前的電池水平一一點亮. | |
| 齒輪溫度控制功能 | 2. 關閉: 關閉Changan旋鈕 2 秒, and the indicator light on the LED strip will turn off the battery’s current level position one by one, 關機聲音將被廣播. “ | |
| 待機功能 | 1. 使用旋鈕調整溫度範圍 180-330 ℃. | |
| 過電流或短路保護 | 2. 順時針旋轉以提高溫度. The light strip lights up from both sides towards the middle of the set gear, 光條的顏色是黃色的. | |
| 吸煙前電壓欠壓 | 3. 逆時針旋轉以降低溫度. 燈條從中間到兩側的固定齒輪上方, 光條的顏色是黃色的. “ | |
| 香煙照明後電壓欠壓 | 當不使用時, 溫度下降 5 攝氏學士學位 5 秒, 最大減少 20% 固定溫度並保持. | |
| 正常充電 | Re-set the temperature and increase the full power to the set temperature. “ | |
| 電池充滿電 | - | |
| 釋放充電 (卸下充電器) | - |
| 產品功能 | 它具有預熱功能, which can preheat for a long time, and has adjustable temperature control. |
| 在節能模式下: 靜電電流<35 μa; | |
| 工作電壓: 8.5在〜12.8V中; | |
| 支持寬電壓充電 (4.5〜6.5V); | |
| 包含保護功能，例如過熱 (OTP), 欠壓 (uvlo), 短路 (SCP), ETC. | |
| Equipped with an LED light display function and a voice broadcast function | |
留言
填寫表格, 指定您的要求和數量 (PCB/PCBA), 並上傳任何相關文檔. 我們將立即為您提供 免費報價!
對於所有從我們那裡購買的產品, 如果您遇到任何質量問題: 我們提供 "24 * 7 售後支持"
在發送我們的文件之前, 你可以 選擇 與我們簽署機密協議 確保您可以完全信心選擇我們.
- 銷售經理：RMY-Silvia
- 電話 ：+86 18126317732
- 電子郵件：sales009@rmychip.com
- WhatsApp ：+86 18126317732
- 公司地址: 8地板,建築物b,FenghuangZhigu,xixiang街,Bao'an District,深圳,中國
- 工廠地址: 4第六層,Fareast工業大樓,第52號路,xixiang街, Bao'an District,深圳,中國
