- 产品概述
Reliable Core for Smart Hookah Devices
Our hookah device PCBA module delivers powerful performance in a compact form. Designed for modern electronic hookah products, it integrates essential control, protection, and user interface functions in one board.
Precise MCU-Controlled System
The module features an advanced MCU that manages power output, airflow signals, and user interaction. It interprets button operations and airflow triggers, offering accurate control with real-time display feedback.
User-Friendly Digital Display
A built-in digital screen shows voltage levels and device status. Users can adjust the output with tactile buttons and monitor changes instantly during operation.
Robust Safety Protection Built-In
Safety is built into the core. The module includes:
- Lithium battery protection
- Overheat protection
- Smoking timeout control
- Short circuit prevention
- Low battery alerts
These protections ensure a stable and secure vaping experience every time.
Efficient Signal Processing
Sensors detect airflow changes and convert them into capacitance signals. The ASIC chip processes these and relays them to the MCU for action. This ensures a fast and accurate response to every inhale.
Compact SMT Packaging for Easy Integration
The module uses SMT packaging, PCBA集成的理想. Manufacturers can solder it directly onto their circuit boards, cutting down assembly time and cost.
Customizable and Scalable for OEM Projects
We support bulk orders and custom configurations. Whether you’re launching a new hookah device or upgrading existing systems, our PCBA module gives your product a high-tech edge.
| 绝对最大评分 | 范围 | 象征 | 价值 | 单元 |
| 电源电压 (电源电压) | 电源电压 | -0.3~13 | V | |
| 充电电压 (VCC) | VCC | -0.3〜6.5 | V | |
| 在输出电流 | IAT | 15 | 一个 | |
| 输出负载 | rload | 0.4 | 哦 |
| 性能参数 | 象征 | 范围 | 状况 | 最小 | typ | 最大限度 | 单元 |
| p | 操作气压 | - - | - - | - - | PA | ||
| 电源电压 | 工作电压 | 9.0V | 12.75 | V | |||
| Vuvlo | 低压检测阈值 | VDD从高到低 | 8.8V | 9 | 9.1 | V | |
| 智商 | 静电电流 | 节能模式 | - - | 30 | 35 | 微安 | |
| RDSON | 切换管传导阻抗 | 这里= 1a | - - | - - | - - | 毫欧 | |
| 爱 | LED输出电流 | - - | - - | - - | 毫安 | ||
| 卢比 | 短路保护阈值 | - - | 0.3 | - - | 哦 | ||
| 增值税 | 恒定平均电压输出 | VDD = 4.2V, 输出空负载 | - - | - - | - - | V | |
| rload | 输出负载 | 0.3 | - - | - - | 哦 | ||
| Dmin | 最小传导占空比 | VDD = 4.2V | - - | - - | - - | % | |
| tsmoke | 吸烟超时 | - - | 10 | - - | S | ||
| VCC | 充电输入电压 | 5 | 6.5 | V | |||
| VFLOAD | 浮动充电阈值电压 | 12.5V | 12.6 | 12.7 | V | ||
| vtrkl | 滴水流, 恒定流动 | VDD从低到高 | 8.75 | 9 | 9.15 | V | |
| 我 | 充电电流 | VCC = 5V | - - | 3000 | - - | 毫安 | |
| itrikl | trick流电流 | VCC = 5V | - - | 300 | - - | 毫安 | |
| TSD | 过热保护阈值 | - - | 90 | - - | ℃ |
| LED/显示状态 | 工作条件 | Voice+LED display |
| Post | The LED light strip lights up in the order of red, green, and blue | |
| Pre-heating | First, power on to enter preheating mode. Then, preheat based on gear temperature for 5 minutes. During this time, adjust the temperature anytime. 同时, the LED strip lights start scrolling. They display 7 scrolling lights per minute. At the same time, all indicator lights remain on. Next, a voice prompt announces preheating completion. Afterward, the light strip switches to breathing mode. Finally, it follows a 5.5-second breathing cycle. | |
| Turn on/off | 1. Power on: Press and hold the knob for 2 seconds to turn on the device, and the startup voice will be broadcasted. The indicator light on the strip will light up one by one from low to the current battery level. | |
| Gear temperature control function | 2. Shutdown: Turn off the Changan knob for 2 秒, and the indicator light on the LED strip will turn off the battery’s current level position one by one, and the shutdown voice will be broadcasted. “ | |
| Standby function | 1. Use the knob to adjust the temperature range between 180-330 ℃. | |
| 过电流或短路保护 | 2. Rotate clockwise to increase temperature. The light strip lights up from both sides towards the middle of the set gear, and the color of the light strip is yellow. | |
| 吸烟前电压欠压 | 3. Rotate counterclockwise to reduce temperature. The light strip turns off from the middle to both sides at the set gear, and the color of the light strip is yellow. “ | |
| 香烟照明后电压欠压 | When not in use, the temperature drops by 5 degrees Celsius every 5 秒, with a maximum decrease of 20% of the set temperature and maintained. | |
| 正常充电 | Re-set the temperature and increase the full power to the set temperature. “ | |
| 电池充满电 | - - | |
| 释放充电 (卸下充电器) | - - |
| 产品功能 | It has a preheating function, which can preheat for a long time, and has adjustable temperature control. |
| 在节能模式下: 静电电流<35 μa; | |
| 工作电压: 8.5V~12.8V; | |
| 支持宽电压充电 (4.5〜6.5V); | |
| 包含保护功能，例如过热 (OTP), 欠压 (uvlo), 短路 (SCP), ETC. | |
| Equipped with an LED light display function and a voice broadcast function | |
留言
填写表格, 指定您的要求和数量 (PCB/PCBA), 并上传任何相关文档. 我们将立即为您提供 免费报价!
对于所有从我们那里购买的产品, 如果您遇到任何质量问题: 我们提供 "24 * 7 售后支持"
在发送我们的文件之前, 你可以 选择 与我们签署机密协议 确保您可以完全信心选择我们.
- 销售经理：RMY-Silvia
- 电话 ：+86 18126317732
- 电子邮件：sales009@rmychip.com
- WhatsApp ：+86 18126317732
- 公司地址: 8地板,建筑物b,FenghuangZhigu,xixiang街,Bao'an District,深圳,中国
- 工厂地址: 4第六层,Fareast工业大楼,第52号路,xixiang街, Bao'an District,深圳,中国
