High-Power Solution Board
3-Drahtmemen Mikrofon, Belastung 0,1 ~ 3,5 Ω, Unterdruck -150 ± 50 Pa Hochleistungs-E-Cig-Leiterplatte mit hoher Leistung
Modell: RMY004
Größe: 44.9× 12,0 mm
Niedrige Leistung: Ruhender Strom <15μA
Einstellbare Leistung (5-80W)
Kurzschlussschutz, 10s Über-Inhalation, Über Temperaturschutz, Niedriger Spannungsschutz
0.96" Farbbildschirm mit UI
Produktübersicht
This is an electronic cigarette circuit board triggered by an airflow sensor for smoking and with adjustable power. It has dual outputs and is mainly composed of the following circuit modules: MCU control module, dual power output module, OLED display screen, colorful light module, charging management module, and lithium battery control module. It can detect smoking actions and control the output through MCU, and display the output wattage and output status through a digital tube.
Funktionale Highlights
- MEMS -Luftstromsensor: The microphone airflow sensor detects changes in air pressure and identifies user smoking behavior.
- Signal processing: The airflow changes captured by the sensor will be converted into capacitance change signals, which will be processed by the ASIC chip and transmitted to the MCU control module for output control.
- Protection function: This PCBA solution board has multiple protection functions to ensure user safety during use, including lithium battery protection, smoking timeout protection, over temperature protection, short circuit protection, and low battery protection
- Module form: SMT packaging is used to form a module form, which allows it to be directly soldered onto the circuit, making it very suitable for PCBA integration, thereby reducing assembly costs and improving production efficiency.
Absolute maximale Bewertungen | Parameter | Symbol | Wert | Einheit |
Versorgungsspannung (VDD) | VDD | -0.3~ 6.0 | V | |
Ladespannung (VCC) | VCC | -0.3~ 6,5 | V | |
Bei Ausgangsstrom | Iat | 25 | A | |
Ausgangslast | Radung | 0.1 | Oh |
Leistungsparameter | Symbol | Parameter | Bedingungen | Min | Typ | Max | Einheit |
P | Betriebsluftdruck | -150 | -200 | -250 | Pa | ||
VDD | Arbeitsspannung | 3.2 | 4.2 | V | |||
Vuvlo | Schwelle mit niedriger Spannungserkennung | VDD von hoch nach niedrig | 2.8 | 3 | 3.1 | V | |
IQ | statischer Strom | Stromsparmodus | 15 | uA | |||
Rdson | Impedanz von Schaltrohrleitungsimpedanz | Hier = 1a | mΩ | ||||
Iled | LED -Ausgangsstrom | - - | - - | - - | mA | ||
Rs | Kurzschlussschutzschwelle | 0.7 | Oh | ||||
Mehrwertsteuer | Konstante Durchschnittsspannungsausgang | Vdd = 4,2 V, Leere Last ausgeben | - - | - - | - - | V | |
Radung | Ausgangslast | 0.1 | - - | 3.5 | Oh | ||
Dmin | Mindestleitungszyklus | Vdd = 4,2 V | - - | - - | - - | % | |
Tsmoke | Rauchzeitüberschreitung | 10 | S | ||||
VCC | Ladeeingangsspannung | 6.5 | V | ||||
VFLOAD | Schwimmende Ladeschwellenspannung | 4.15 | 4.2 | 4.25 | V | ||
Vtrkl | Tropfenfluss, konstanter Fluss | VDD von niedrig bis hoch | 2.95 | 3 | 3.05 | V | |
ICH | Aufladungsstrom | VCC = 5V | 1500 | mA | |||
Itrikl | Trickle Ladungsstrom | VCC = 5V | 100 | mA | |||
TSD | Überhitzungsschutzschwelle | 85 | ℃ |
LED/Anzeigestatus | Arbeitszustand | 0.96-Inch -Anzeigebildschirm |
Batteriestrom am Selbsttest | Screen display main interface | |
Normales Auslösen der Zigarettenbeleuchtung | Screen time scrolling, displaying output voltage | |
Rauchen normal | Screen time scrolling, displaying output voltage | |
Normales Ende der Zigarettenbeleuchtung | Screen display main interface standby | |
Rauchzeitüberschreitung | Bildschirmaufforderung "10s geklebt" | |
Überstrom- oder Kurzschlussschutz | Bildschirmaufforderung "Kurzer Zerstäuber " | |
Unterspannung der Batterie vor dem Rauchen | Bildschirmaufforderung "Batty niedrig" | |
Batterieunterspannung nach Zigarettenbeleuchtung | Bildschirmaufforderung "Batty niedrig" | |
Normales Laden | Bildschirm Batterie Symbol Scrollen | |
Batterie voll aufgeladen | - | |
Ladung veröffentlichen (Ladegerät entfernt) | Screen battery icon stops running |
Produktmerkmale | Einstellbare Leistung, precise adjustable output power of 5-80W |
Der Ausgangsmodus kann aus dem Temperaturregelmodus ausgewählt werden, Leistungsregulierungsmodus, usw | |
Verwenden von MEMS -Luftstromsensoren für eine stabile Leistung; | |
Arbeitsspannung: 2.1V ~ 5.0v; | |
Unterstützt breite Spannungsladung (4.5~ 6,5 V); | |
Beinhaltet Schutzfunktionen wie über Temperatur (OTP), niedrige Spannung (Uvlo), Kurzschluss (Scp), usw; | |
Mit a 0.96 Bildschirm anzeigen, Es verfügt über eine reichhaltige UI -Anzeigefunktionen; |
Electronic atomizer PCBA solution
PCBA -Produkte
Shenzhen Rimyi Technology Co., LTD
Definieren Sie High-End-elektronische Zigarette
PCBA -Technologie -Benchmark
Anti -Öl -Touch -Technologie, Antwort<50MS
Bluetooth Seamless Verbindung, OTA Remote -Upgrade
Geschmacksalgorithmus auf Software Level, Temperaturkontrollgenauigkeit von ± 1 ℃
Branchenführende Wärmeableitungsdesign, stabiler Ausgang von 200 W
Bluetooth Seamless Verbindung, OTA Remote -Upgrade
Geschmacksalgorithmus auf Software Level, Temperaturkontrollgenauigkeit von ± 1 ℃
Branchenführende Wärmeableitungsdesign, stabiler Ausgang von 200 W
Shenzhen Rimyi Technology Co., LTD
Definieren Sie High-End-elektronische Zigarette
PCBA -Technologie -Benchmark
Anti -Öl -Touch -Technologie, Antwort<50MS
Bluetooth Seamless Verbindung, OTA Remote -Upgrade
Geschmacksalgorithmus auf Software Level, Temperaturkontrollgenauigkeit von ± 1 ℃
Branchenführende Wärmeableitungsdesign, stabiler Ausgang von 200 W
Bluetooth Seamless Verbindung, OTA Remote -Upgrade
Geschmacksalgorithmus auf Software Level, Temperaturkontrollgenauigkeit von ± 1 ℃
Branchenführende Wärmeableitungsdesign, stabiler Ausgang von 200 W